TG5000E Tub Grinder
- Efficiency in a stationary electric tub grinder
- Robust build quality for confident longevity
- Equipped with Vermeer innovations to help protect your investment and optimize efficiency
General
| Manufacturer | Vermeer |
| Model | TG5000E Tub Grinder |
| Category | Recycling, Renewable Energy, Wood Waste |
| Price | Request a Quote |
| Year | 2024 |
General Dimensions and Weights - Non Loader
| Maximum Length - Transport | 29.3ft (8.9m) |
| Maximum Length - Conveyor Unfolded | 51.3ft (15.6m) |
| Maximum Width (Transport) | 8.4ft (2.5m) |
| Maximum Height (Transport) | 11.8ft (3.6m) |
| Weight - Engine Option One | 42080lbs (19087.2kg) |
| Front Mount Pad Weight (Operation) | 14800lbs (6713.2kg) |
| Rear Mount Pad Weight (Operation) | 30650lbs (13902.6kg) |
Mill Motor
| Make and Model | WEG W22 |
| Gross Horsepower (Maximum) | 500hp (372.8kw) |
| Torque (Max) | 1451ft-lb (1967.3Nm) |
| Cooling Medium | Air |
| Torque Limiter | PT Tech - Continuously engaged, friction type |
Electric Fan Motor Option 1 - 460 V / 60 Hz
| Manufacturer | Weg W22 |
| Frame | NEMA 145T |
| Horsepower | 2hp (1.5kw) |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1750rpm |
| Enclosure | TEFC |
| Full Load Amps | 2.61 |
| Locked Rotor Amps | 19.6 |
| Service Factor | 1.25 |
| Duty Cycle | S1 |
| NEMA Design | B |
| Insulation Class | F |
| Full Load Torque | 5.9ft-lb (8Nm) |
| Locked Rotor (%) | 240% |
| Break Down | 300% |
| Ambient Temperature | 40c (1352f) |
| Nominal Efficiency | 86.5 (NEMA Premium Efficiency) |
| Power Factor | 0.84 |
| Approximate Weight | 51lbs (23.1kg) |
| Added Items | Terminal Block, NEMA C-Face Mount |
| Drive Type | Direct |
Electric Hydraulic Motor Option 1 - 460 V / 60 Hz
| Manufacturer | Weg W22 |
| Frame | NEMA 364/5TS |
| Horsepower | 60hp (44.7kw) |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1775rpm |
| Enclosure | TEFC |
| Full Load Amps | 68.3 |
| Locked Rotor Amps | 451 |
| Service Factor | 1.25 |
| Duty Cycle | S1 |
| NEMA Design | B |
| Insulation Class | F |
| Full Load Torque | 175ft-lb (237.3Nm) |
| Locked Rotor (%) | 240% |
| Break Down | 260% |
| Ambient Temperature | 40c (1352f) |
| Nominal Efficiency | 95 (NEMA Premium Efficiency) |
| Power Factor | 0.87 |
| Approximate Weight | 869lbs (394.2kg) |
| Added Items | Terminal Block, NEMA C-Face Mount, Short Shaft |
| Drive Type | Direct |
Electric Mill Motor Option 1 - 460 V / 60 Hz (Soft Start)
| Manufacturer | Weg W22 |
| Frame | NEMA L447/9T |
| Horsepower | 500hp (372.8kw) |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1785rpm |
| Enclosure | TEFC |
| Full Load Amps | 561 |
| Locked Rotor Amps | 4040 |
| Service Factor | 1 |
| Duty Cycle | S1 |
| NEMA Design | B |
| Insulation Class | F |
| Full Load Torque | 1451ft-lb (1967.3Nm) |
| Locked Rotor (%) | 250% |
| Break Down | 260% |
| Ambient Temperature | 40c (1352f) |
| Nominal Efficiency | 96.2 (NEMA Premium Efficiency) |
| Power Factor | 0.86 |
| Approximate Weight | 3462lbs (1570.3kg) |
| Added Items | Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E bearing |
| Drive Type | Direct |
Electric Mill Motor Option 1 - 460 V / 60 Hz (VFD)
| Manufacturer | Weg W22 |
| Frame | NEMA 586/7T |
| Horsepower | 500hp (372.8kw) |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1790rpm |
| Enclosure | TEFC |
| Full Load Amps | 567 |
| Locked Rotor Amps | 4026 |
| Service Factor | 1.15 |
| Duty Cycle | S1 |
| NEMA Design | N |
| Insulation Class | F |
| Full Load Torque | 1454ft-lb (1971.4Nm) |
| Locked Rotor (%) | 260% |
| Break Down | 260% |
| Ambient Temperature | 40c (1352f) |
| Nominal Efficiency | 96.1 (NEMA Premium Efficiency) |
| Power Factor | 0.85 |
| Approximate Weight | 4041lbs (1833kg) |
| Added Items | Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E bearing |
| Drive Type | Direct |
Electric Fan Motor Option 2 - 380 V / 50 Hz
| Manufacturer | Weg W22 |
| Frame | IEC 90L |
| Horsepower | 2hp (1.5kw) |
| Voltage | 380 |
| Frequency | 50 |
| Phase | 3 |
| Rated Speed | 1445rpm |
| Enclosure | TEFC |
| Full Load Amps | 3.21 |
| Locked Rotor Amps | 23.8 |
| Service Factor | 1 |
| Duty Cycle | S1 |
| NEMA Design | N |
| Insulation Class | F |
| Full Load Torque | 7.3ft-lb (9.9Nm) |
| Locked Rotor (%) | 230% |
| Break Down | 300% |
| Ambient Temperature | 40c (1352f) |
| Nominal Efficiency | 85.6 |
| Power Factor | 0.83 |
| Approximate Weight | 51lbs (23.1kg) |
| Added Items | Terminal Block, NEMA C Face Mount |
| Drive Type | Direct |
Electric Hydraulic Motor Option 2 - 380 V / 50 Hz
| Manufacturer | Weg W22 |
| Frame | IEC 225S/M |
| Horsepower | 60hp (44.7kw) |
| Voltage | 380 |
| Frequency | 50 |
| Phase | 3 |
| Rated Speed | 1475rpm |
| Enclosure | TEFC |
| Full Load Amps | 83.9 |
| Locked Rotor Amps | 663 |
| Service Factor | 1 |
| Duty Cycle | S1 |
| NEMA Design | N |
| Insulation Class | F |
| Full Load Torque | 213ft-lb (288.8Nm) |
| Locked Rotor (%) | 250% |
| Break Down | 270% |
| Ambient Temperature | 40c (1352f) |
| Nominal Efficiency | 94.7 |
| Power Factor | 0.86 |
| Approximate Weight | 926lbs (420kg) |
| Added Items | Terminal Block, NEMA C Face Mount |
| Drive Type | Direct |
Electric Mill Motor Option 2 - 380 V / 50 Hz (Soft Start)
| Manufacturer | Weg W22 |
| Frame | IEC 355M/L |
| Horsepower | 500hp (372.8kw) |
| Voltage | 380 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1790rpm |
| Enclosure | TEFC |
| Full Load Amps | 688 |
| Locked Rotor Amps | 5227 |
| Service Factor | 1.15 |
| Duty Cycle | S1 |
| NEMA Design | N |
| Insulation Class | F |
| Full Load Torque | 1454ft-lb (1971.4Nm) |
| Locked Rotor (%) | 260% |
| Break Down | 260% |
| Ambient Temperature | 40c (1352f) |
| Nominal Efficiency | 96.1 |
| Power Factor | 0.85 |
| Approximate Weight | 4041lbs (1833kg) |
| Added Items | Terminal Blocks; thermostats, inverter duty; D.E. ground brush & insulated N.D.E. bearing |
| Drive Type | Direct |
Electrical Panel (Soft Start)
| Height | 87in (221cm) |
| Width | 72in (182.9cm) |
| Depth | 27in (68.6cm) |
| Weight | 1800lbs (816.5kg) |
Electrical Panel (VFD)
| Height | 93in (236.2cm) |
| Width | 119in (302.3cm) |
| Depth | 28in (71.1cm) |
| Weight | 3020lbs (1369.8kg) |
Feed System
| Tub Table Thickness | .4in (1cm) |
| Tub Table Type | T1 Steel |
| Table Tilt Degrees | 91deg |
| Millbox Opening | 24.2" x 47.9" (61.4 cm x 121.5 cm) |
| Inside Diameter of Tub | 8ft (2.4m) |
| Inside Flare Diameter - At Base of Tub | 8.1ft (2.5m) |
| Inside Flare Diameter - At Tub Opening | 12.3ft (3.7m) |
| Depth of Tub | 5ft (1.5m) |
| Tub Capacity | 11.3cu yd (8.6cu m) |
| Wall Thickness | .3in (.6cm) |
| Wall Type | T1 Steel |
| Loading Height | 10.6ft (3.2m) |
| Drive Type | Continuous sprocket |
| Drive Chain | 120H roller chain |
| Drive Tensioner | Standard |
| Drive Motor | Open loop |
| Tub Roller Quantity | 8 carrier, 8 guide (16 total) |
| Tub Speed | 10rpm |
| Tub Agitators | 4 |
Safety System
| Thrown Object Restraint System | Pivoting tub cover assembly |
| Tub Cover Description | Hydraulically activated |
| Tub Cover Positions | 2 |
| Rotor Deflector | Standard |
| Falling Object Protection at Control Station | Overhead and side protection |
Duplex Drum
| Drum Diameter | 22.5in (57.2cm) |
| Tip Diameter | 28.6in (72.6cm) |
| Drum Cutting Width | 46in (116.8cm) |
| Drum Skin Thickness | 1.8in (4.4cm) |
| Drum Speed | 1785rpm |
| Bearing Type | spherical roller |
| Number of Hammers | 8 |
| Number of Cutters | 16 |
| Cutter Block Types | Block style single bolt wide 3" x 3.5" (7.6 cm x 8.9 cm) wide; 2-bolt 2" x 3" (5.1 cm x 7. 6 cm) narrow |
| Center Retention Pin Dimensions | 2" (5.1 cm) |
| Number of Wipers | 2 |
Screens
| Screen Weight | 400lbs (181.4kg) |
| Screen Dimensions | 49.5" x 28.5" x 14.9" (126 cm x 72.4 cm x 37.8 cm) |
| Screen Type | Fabricated from abrasion resistant steel (qty 2) |
| Breaker Bar Type | T1 steel, replaceable |
| Breaker Bar Dimensions | 2.5" x 3" (6.4 cm x 7.6 cm) |
| Screen Area | 2714sq in (17509.6sq cm) |
| Distance - Screen to Millbox Wall | 11in (27.9cm) |
Discharge System - Single Belt Design
| Length | 24ft (7.3m) |
| Width | 36in (91.4cm) |
| Belt Design | One piece, 330# with V-cleat |
| Splice | Flexco R2 stainless steel |
| Return Roller Quantity | 5 standard and 1 vibrating roller |
| Idler Roller Diameter | 8in (20.3cm) |
| Standard Drive Roller Diameter | 12.8in (32.5cm) |
| Magnetic Drive Roller Diameter | 12.8in (32.5cm) |
| Drive Motor | Geroler |
| Belt Speed | 640ft/min (195.1m/min) |
| Load Height | 14ft (4.3m) |
Hydraulic System
| Tank capacity | 95gal (359.6L) |
| Recommended Oil | Hy-Power 68 |
| Filtration Method | In-tank return filters (qty 2) |
| Number of Coolers | 1 |
Implement Hydraulics
| System Type | Open loop |
| Pump Type | Gear |
| Pump Flow at Maximum RPM | 19.2gpm (72.7L/min) |
| System relief pressure | 2800psi (193.1bar) |
Tub Drive Hydraulics
| System Type | Open loop |
| Pump Type | Gear |
| Pump Flow at Maximum RPM | 19.2gpm (72.7L/min) |
| System relief pressure | 2800psi (193.1bar) |
Electrical System
| System Voltage | 24 VDC |
| System Protection | Fused |
Control Station
| Display Type | Analog hydraulic gauges, LCD multifunction |
| Machine Information | Yes |
| Operational Faults | Yes |
| Gauges | Auxiliary hydraulic system pressure, tub rotation hydraulic system pressure, conveyor hydraulic system pressure |
| Switches | Moisture proof, toggle switch |
Radio Remote Control
| Display Type | LCD multifunction |
| Engine Information | Motor start/stop |
| Motor Information | Yes |
| Machine Information | Yes |
| Operational Faults | Yes |
| Switches | Sealed membrane |
| Operating Range | 300' (91.4 m) |
| Battery Type | AA (qty 6) |
| Channel Setting | 50 channels |
Chassis
| Frame Description | Continuous I-beam |
Other Options - Tub Grinder
| Screens | Optional |
| Special Tools Group | Optional |
| Special Paint | Optional |
| Extended Warranty | Optional |
| Preventative Maintenance | Optional |