The T1055III surface miner is equipped with a Caterpillar C13 ACERT Tier 3 or Tier 4 Final electronic engine, giving you the power needed to level surfaces on your construction or mining site. Pair this with a top-down cutting system to achieve greater rock penetration.
| Manufacturer | Vermeer |
| Model | T1055III Surface Miner |
| Category | Surface Mining |
| Price | Request a Quote |
| Year | 2024 |
| Approach Angle | 16deg |
| Height Range | 135 " (342.9 cm) |
| Weight Range | 87,000 lbs - 124,000 lbs (39,463 kg - 56,245 kg) |
| Width Ranges | 116 " - 122 " (294.6 cm - 309.9 cm) |
| Length with 40" (101.6 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar) | 41ft (12.5m) |
| Length with 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom | 34.7ft (10.6m) |
| Length with 50" (127 cm) End Idler and 10 ft (3.05 m) Boom | 38.3ft (11.7m) |
| Length with 40" (101.6 cm) End Idler and 10 ft (3.05 m) Boom | 37.2ft (11.3m) |
| Length with 40" (101.6 cm) End Idler and 12 ft (3.66 m) Boom | 39.7ft (12.1m) |
| Length with 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom | 32.2ft (9.8m) |
| Length with 50" (127 cm) End Idler and 12 ft (3.66 m) Boom | 40.8ft (12.4m) |
| Length with 50" (127 cm) End Idler and 8 ft (2.44 m) Boom | 35.8ft (10.9m) |
| Track Length | 176in (447cm) |
| Tilt Track Available | No |
| Auto Self Level | No |
| Service Brakes | Hydrostatic |
| Track Pad Type | Single or double grouser |
| Track Size | D7G |
| Parking and Emergency Brake | Spring applied, hydraulic release, wet disc brake |
| Track Drive Type | Dual path hydrostatic with planetary transmission |
| Track Pad Width Ranges | 24 " or 30 " (61 cm or 76.2 cm) |
| Maximum Ground Speed - High | 114ft/min (34.8m/min) |
| Maximum Ground Speed - Low | 57.1ft/min (17.4m/min) |
| Ground Pressure Minimum | 9.4psi (64.8kPa) |
| Ground Pressure Maximum | 13.9psi (95.8kPa) |
| Air Conditioner/Heater | Yes |
| Air Suspension Seat | No |
| Elevating | Yes |
| Pressurized/Filtered Air | Yes |
| Rollover Protective Structure (ROPM) | Yes |
| AM/FM Stereo with Weather Band | Yes |
| Cab | Yes |
| Control System | TEC Plus |
| Pressure Setting | 2500psi (172.4bar) |
| Oil Tank Capacity | 152gal (575.4L) |
| Pump Flow at Maximum RPM | 27.9gpm (105.6L/min) |
| Pump Type | Pressure and flow compensated (load sensing) |
| Oil Type | Vermeer HyPower 68 or Vermeer HyPower 100 |
| Trencher | Yes |
| Terrain Leveler | Yes |
| Rockwheel | No |
| Bucket Wheel | No |
| Make and Model | Caterpillar C13 ACERT Tier 3 |
| Gross Horsepower | 415hp (309.5kw) |
| Rated Engine RPM | 2100 |
| Number of Cylinders | 6 |
| Fuel Tank Capacity | 200gal (757.1L) |
| Operating Range | 9.58 hours |
| Fuel Consumption at Full Load | 20.9gph (79.1lph) |
| Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) | 35deg |
| Air Cleaner | Dry-type exhaust aspirated |
| Aspiration | Turbocharged and air-to-air aftercooled |
| Cooling Medium | Liquid |
| Electrical System | 24 Volt DC |
| Oil Filter | Full flow |
| Make and Model | Caterpillar C13 ACERT Tier 4 Final |
| Gross Horsepower | 415hp (309.5kw) |
| Rated Engine RPM | 2100 |
| Number of Cylinders | 6 |
| Fuel Tank Capacity | 200gal (757.1L) |
| Operating Range | 9.39 hours |
| Fuel Consumption at Full Load | 21.3gph (80.6lph) |
| Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) | 35deg |
| Air Cleaner | Dry-type with pre-cleaner |
| Aspiration | Turbocharged and air-to-air aftercooled |
| Cooling Medium | Liquid |
| Electrical System | 24 Volt DC |
| Oil Filter | Full flow |
