TR5300EM Trommel Screen
- Electric-powered efficiency
- Quiet operation for wherever the job may take you
- Complete control for overall jobsite confidence
General
| Manufacturer | Vermeer |
| Model | TR5300EM Trommel Screen |
| Category | Landscape, Recycling |
| Price | Request a Quote |
| Year | 2024 |
General Dimensions and Weights
| Weight | 32000lbs (14515kg) |
| Hitch Weight | 11600lbs (5261.7kg) |
| Transport Length | 39ft (11.9m) |
| Transport Width | 98.4in (249.9cm) |
| Transport Height | 13.4ft (4.1m) |
| Operation Length | 89.9ft (27.4m) |
| Operation Width | 112.8in (286.5cm) |
| Operation Height | 15ft (4.6m) |
| Capacity | 100 cu yd (76.5 m3) per hr with 0.5-in (12.7-mm) screens installed and material with moisture less than 40% |
Motor Option One
| Make and Model | Siemens |
| Motor rating | 480 VAC, 3 Phase, 60 Hz, 60 hp (44.7 kW), 177 lb-ft (240 Nm) at 1800 rpm |
| System Voltage | 12 V |
| AC panel | 75 hp, 480 VAC, soft start |
Hydraulic System
| Tank capacity | 55gal (208.2L) |
Chassis
| Frame Description | Heavy-duty structural tubing |
| Axle/Suspension | Single leaf sprung |
| Capacity | 20000lbs (9071.8kg) |
| Tires - Option One | 445/50R22.5 |
Hopper and Apron Conveyor
| Hopper Capacity | 5.5cu yd (4.2cu m) |
| Hopper Bottom Width | 37in (94cm) |
| Hopper Height | 9.5 ft (2.9 m) |
| Hopper Opening | 34-in tall x 37-in wide |
Screen Drum
| Drum Operation | 0-30.9 gpm (0-117 L/min) |
| Drum Diameter | 5ft (1.5m) |
| Drum Support Description | Eight poly trunnion rollers 8-in (20.3-cm) diameter, 4-in (10.2-cm) wide |
| Drum Length | 15ft (4.6m) |
| Thrust Bearing Diameter | 4in (10.2cm) |
| Thrust Bearing Face | 2.9in (7.4cm) |
| Drum Speed | 0-24 rpm |
| Drum Drive Chain | 140 custom extended pin |
| Drum Angle Adjustability | 0-7 deg |
| Maximum Screen Panels | 4 |
Screen Brushes
| Brush Diameter | 14in (35.6cm) |
| Bristle Material | Polyethylene |
| Brush Assembly Support | Two 1.25-in (2.3-cm) sealed ball bearings |
Fines Conveyor
| Conveyor Operation | 17gpm (64.4L/min) |
| Conveyor Motor Displacement | 33cu-in (540.8cu-cm) |
| Fines Conveyor Length | 55ft (16.8m) |
| Fines Belt Speed | 500ft/min (152.4m/min) |
| Conveyor Belt Width | 36in (91.4cm) |
| Conveyor Belt Type | 220-lb, 2-ply, 3/16 in x 1/16 in, R2 splice, continuous belt optional |
| Conveyor Belt Stacking Height | 15 ft |
| Head Pulley Type | Rubber-lagged, 12-in (30.5-cm) diameter, 38-in (96.5-cm) width |
| Head Pulley Bearing | 2 7/16-in (6.2-cm) pillow block |
| Troughing Idler Type | 20-deg CEMA "B" with permanently seated bearings |
| Self-Cleaning Tail Pulley Dimensions | 10-in (25.4-cm) diamater, 38-in (96.5-cm) width with 2 7/16-in (6.1-cm) shaft |
| Head Pulley Takeup | 10in (25.4cm) |
| Self-Cleaning Return Idlers | 4-in (10.2-cm) rubber disc, qty 8 |
| Fines Conveyor Frame | 2 in (5.1 cm) x 8 in (20.3 cm) structural steel tubing |
Overs Conveyor - Option 1
| Overs Conveyor Length | 10.5ft (3.2m) |
| Maximum Variable Overs Belt Speed | 250ft/min (76.2m/min) |
| Conveyor Belt Size | 36 in |
| Conveyor Belt Type | 220 lb, 2-ply, 3/16 in x 1/16 in, R2 splice, continuous belt optional |
| Conveyor Belt Stacking Height | 7 ft (2.1 m) |
| Head Pulley Type | Rubber lagged, 12-in (30.5-cm) diameter, 38-in (96.5-cm) width |
| Head Pulley Bearing | 2 7/16-in (6.2-cm) pillow block |
| Self-Cleaning Tail Pulley Dimensions | 10-in (25.4-cm) diameter, 38-in (96.5-cm) width with 2 7/16-in (6.1-cm) shaft |
Overs Conveyor - Option 2
| Overs Conveyor Length | 25ft (7.6m) |
| Maximum Variable Overs Belt Speed | 250ft/min (76.2m/min) |
| Conveyor Belt Size | 36 in |
| Conveyor Belt Type | 220 lb, 2 ply, 3/16 in x 1/16 in, R2 splice, continuous belt optional |
| Conveyor Belt Stacking Height | 13.75 ft (4.2 m) |
| Head Pulley Type | Rubber lagged, 12-in (30.5-cm) diameter, 38-in (96.5-cm) width |
| Head Pulley Bearing | 2 7/16-in (6.2-cm) pillow block |
| Self-Cleaning Tail Pulley Dimensions | 10-in (25.4-cm) diameter, 38-in (96.5-cm) width with 2 7/16-in (6.1-cm) shaft |