Vermeer TRUCK Vacuum EXCAVATORS

The New Powerhouse in Vacuum Excavation

Trenchless expertise has never been in higher demand, and your ability to make a big impact with a small footprint is critical. Vermeer has become the new powerhouse in vacuum excavation technology and equipment, and is manufacturing truck vacuum equipment and technology that are among the best in the world.

Several new, heavy-duty Vac Trucks are in-stock now, while others are set to arrive in the near future. Check out the Vermeer Truck Vacuum Excavators below, and contact us to learn more.

vxt300

Debris Body: 8 yd³
Water Tank: 800 gal
Water Pump: 10 gpm @ 3,000 psi
Vacuum Suction: 3,500 cfm
Boom Reach: 14 - 19 ft
Hose Diameter: 6 in

The VXT300 series of truck vacs is designed for contractors focused on fast and reliable vacuum excavation from jobsites to dumpsites. The VXT300 series is available in an 8-yd³ spoil tank capacity with 800-gal water tank capacity. Meet project deadlines using the productive 6-in PTO-driven truck vac with 3,500-cfm “free air” and is capable of 18 in Hg.

vxt500

Debris Body: 8 yd³
Water Tank: 765 gal
Water Pump: 11.5 gpm @ 3,000 psi
Vacuum Suction: 4,800 cfm
Boom Reach: 21 ft
Hose Diameter: 8 in

The truck’s engine, through an OMSI soft-start transmission, powers a 4,800-cfm blower and 27-in Hg vacuum. The onboard water system has a flow of 11.5 gpm and water pressure capacity of 3,000 psi. The 74,000-lb GVWR-rated axle configuration allows for maximum utilization of the 8-yd³ spoil tank.

keep running

A hydraulic PTO helps keep you running and saves time because you do not need to shift power back and forth to the vac and truck.

Maximum capacity

Soil Tank capacities range from 1,300 gallons (4,921 L) to 16 yds³ (14.6 m³)

high power

Suction power ranges from 3,400 cfm (96.3 m³/min) to 6,400 cfm (181.2 m³/min)

vxt600

vxt600-11

Debris Body: 11 yd³
Water Tank: 1,300 gal
Water Pump: 19.4 gpm @ 3,000 psi
Vacuum Suction: 6,400 cfm
Boom Reach: 26 ft
Hose Diameter: 8 in

vxt600-16

Debris Body: 16 yd³
Water Tank: 2,400 gal
Water Pump: 19.2 gpm @ 4,000 psi
Vacuum Suction: 6,400 cfm
Boom Reach: 26 ft
Hose Diameter: 8 in

The VXT600-11 model features an upgraded capacity with 11 yd³ of debris capacity and 1,300 gal of water in the central tank. The VXT600-16 model features 16 yd³ of debris capacity and 2,400 gal of water. The unit features a built-in 10-degree floor slope along with a three-stage lift cylinder and a full-radius, half-moon rear door for quick and efficient unloads. These combined features make the VXT600 one of the quickest tanks on the market to empty. This unit also features the powerful Jurop Helix 6,400-cfm PD blower driven by the OMSI transfer case with blower clutch pack soft-start engagement.

xr2

Debris Body: 1,300 gal slurry
Water Tank: 1,500 gal
Vacuum Suction: 3,400 cfm
Max Boom Reach: 252 in
Max Conveyor Reach: 168 in
Hose Diameter: 6 in

The XR2 vacuum excavator is the industry’s first vacuum excavator equipped with a shaker deck that separates liquids and solids to allow contractors to stay on the jobsite longer, work efficiently and reduce disposal expenses. Material excavated with the XR2 is fed through an onboard deceleration tank that exits through an airlock onto a shaker deck where solids and liquids are then separated. The solid material is moved by conveyor toward the rear of the machine where it is discharged and can be carried away or left on the jobsite, depending on the material. Used, slurry water is pumped into the fluid storage tanks for disposal. The design of the XR2 can help expand the use of vacuum excavation for everything from utility potholing and stitch boring to slot trenching and general construction, equipping you to do more.